Did You Know?
LightWave where you might not expect it
LightWave prides itself on the mantra of fast, easy, proven. This isn't only the capabilities of the team and software, but the versatility and talent of LightWave’s many users, whom we wouldn’t be here without. In celebration of the innovative skills of our community, this article aims to bring to light individuals utilising LightWave in fields you’d least expect…
Animation & Visualisation in Dentistry
Pere Colomina
Hola, I’m Pere Colomina from Barcelona. I'm a dental technician and trainer for dentists and lab technicians. Since I started lecturing in this field in the 1990s I felt the need to go further than 2D Photoshop compositions and into something more visual as my Keynotes on dental rehabilitation content were complex to explain when relying only on images and my words exclusively. I needed to step into 3D to make a difference.
I started with a friendly amateur software in 2002 to learn the basics, Carrara Studio 2 from Eovia. That made a difference, and my lectures popped out even with basic stills or animations. People were grateful they could understand better, even if hours of work would only bring a few seconds of animation. It was okay, those seconds made the difference.
I've always known about LightWave 3D as we had Amiga 500 and onwards in the 90’s, my brother Johnny was on Video Toaster so the name LightWave was everywhere. Even so, it took time for me to make a decision - in 2010 I stepped fully into LightWave 10, I had to go into “Pro” mode and even with what was a slow learning curve (compared to Carrara), once in it... it was a Blast! The visuals, animations, render engine, later physics... everything was just from another world. My courses, lectures and support to branding is something I could only have dreamed about.
LW: How do you use LightWave in your work?
I am Technical Director for the Spain area at a German company where I use LightWave to support not only my content as trainer for our clients but as well I help our marketing colleagues to create content for catalogues, Instagram, posters and conceptual animation to explain how products work as well as their properties. As well and upon request of my original customers from the times as Lab technician I have kept my personal courses on dental rehabilitation matters which I give occasionally, and which generate a nice source of extra income. These courses have become highly specialised as my knowledge in LightWave increases and helps me to project crystal clear concepts. I never finish repeating to myself, speak just the enough amount... but get a lot visual!! You have LightWave helping here. I apply these gains fully for the company I proudly work for (BEGO) as well as for my own occasional activities.
Many times, I create content just to evaluate myself and get new tools going. Like the attached image where I worked on an Armstrong bust to reproduce it in full 3D from a painting I own of him. I challenged myself not to do the exact shape but get his face expression through retopology.
Or when I rigged a full car engine as a rigging exercise, it came out fine after spending many many hours. That was hard but I learned. I have only scratched the surface of LightWave compared to what it can provide for me. New tools like VDBs are challenging but spectacular, plugins all over or ProTools... etc. And Modeler is just amazing. I am into everything although I have this permanent feeling that I lack time to get the expert status I aim for. But I am getting there...
Court Visuals & Military Proposals:
Deuce Bennett
‘Court Visualisation’ ultimately is producing imagery and animation that the lawyers want to be able to present information to a jury to get them quickly to understanding what we're talking about. So, if a picture is worth 1000 words, an animation can be worth several million. I do everything; from medical visualisations, infringement lawsuits, accident reconstructions to scene recreation.
An example for creating visuals for medical cases could go along the lines of animating how a hip replacement is done; for legal necessity, was it done wrong? Then here’s how it supposed to go...
Reconstruction can vary from animating a car accident, visually showing the jury what the scene looked like from the driver’s point of view, or based upon the measurements at the scene, this is how fast he was going. Or producing a recreation of several officers involved in a shooting, recreating seven different points of view in one animation, getting the perspectives of each officer in their positions. Because we're using LightWave and we’re doing 3D, it’s very easy to put the camera in any position you want to illustrate for the jury.
The other aspect I support is the proposal industry, people contact me, trying to sell an idea that’s difficult to communicate, needing imagery to help illustrate. Again, it comes back to ‘a picture is worth 1000 words'. Working in the past on military proposals for DARPA where companies reach out to provide imagery for various ideas that have been put up. Using what is known as a ‘quad sheet’, an 8 ½ by 11 sheet of paper divided into four pieces- one quadrant is meant for illustration.
So, when DARPA is flipping through the submissions, it’s the ones that have neat-looking visuals that grab the eye. And again, why LightWave? Because I can do things so much faster, and fast feedback is what they’re after.
I did a project for Lockheed Martin Missiles and Fire Control where they had this idea for creating a vehicle, a mobile platform that could utilise some of the technology that they had been using with their missiles, with guidance systems and everything. I was part of that initial presentation to the Pentagon. And this was because of the animations we did; they went through the rule book of what you can and can’t present to the Pentagon, and realised there was nothing that said they couldn't add a DVD of an animation. So, we did a 2–3-minute animation showing what this system was cable of. Two things happened. Number one, they won a $90 million contract to start development of that system, and number 2, the Pentagon put out a new rule that submissions must include animations. So that project changed the whole methodology of proposal submissions for the military.
Armed Fly Around
Sweeper Coversheet Concept
Land with Sky
SSCI Quadrotor Through
Twenty Four and Five Panels
Viking 400 Standard
SMSS Overlook Compound
Oil Placement
'MiniVerse' Modelling
Lori Anne Brown
I’m Lori Anne Brown, ecommerce entrepreneur for 25 years and the former LightWave 3D instructor at Full Sail University, Winter Park, FL. I started using LightWave on a Video Toaster on an Amiga 2000, added an Amiga 3000 and 4000T with a Video Toaster/Flyer and we used to produce videos for television commercials for our own events as well as some for music videos. When my partner & I split in 2001, I switched gears to ecommerce to figure out how to make a living, but continued to use LightWave from time to time for fun.
In 2017, I bought my first 3D printer and started re-working with LightWave to learn modelling for print (my ex was primarily the modeler while I did animation, lighting, texturing, etc.) I’ve experimented with it on and off for a few years, though around October 2024 I found a niche that would do well for me and created my models in LightWave launching my Etsy shop in January 2025 (3dprintingdragonfly.etsy.com). I work pretty exclusively in Modeler these days learning how to improve my modelling for better prints.
LW: How do you use LightWave within your work?
Lightwave 3d is my primary modeler for all my 3D printed products with Meshmixer and Blender occasionally used to help refine the STL file. I have a small print farm with nine 3D printers and spend a lot of time testing and refining my models for better quality prints.
I create mainly 3D printed miniature displays for crafting kits called “MiniVerse”. I started with simple miniature shelving displays and have been branching out with diorama kits and am working on some hinged displays and other home decor items. Not sure I have a favourite, though I did finally get a dragonfly shelf that I started modelling three years ago to a better quality to actually release it for sale. At present, I do pretty simple modelling with basic shapes, bevel, smooth shift, etc. I still feel like I have a lot to learn in modelling, but love the process and hope eventually to get better at metaforms and more organic modelling.
The World of Vertebrate Palaeontology:
Michael Polcyn
My name is Dr. Michael J. Polcyn, and I’m a Senior Research Fellow in the ISEM (Institute for the Study of Earth and Man) at Southern Methodist University in Dallas, Texas. I am a vertebrate palaeontologist, which is a scientist that studies the fossilised remains of animals with backbones, and their broader geological context, to build our knowledge of the history of life on Earth. I specialise in marine reptiles, with a focus on the evolution and palaeobiology of mosasaurs; ocean-going lizards from the age of dinosaurs.
I employ a lot of visualisation technologies in my work, including CT scanning and surface scanning, to capture the internal and external morphology of the bones and photogrammetry to capture larger items like dig sites, to record the position of the bones within the excavations. From those technologies, I derive surface models that can be used for a variety of purposes, including visualisations of individual elements, restorations and reconstructions of the animal, and as the foundation of other techniques to quantify biomechanical aspects of the bones (Finite Element Analysis [FEA]) and to examine shape variation from a quantitative perspective (3D Geometric Morphometrics). When working on research projects with colleagues, I can share the 3D models with them (virtually and as 3D prints) and I also use those same models to render illustrations for presentations and publications, both peer-reviewed and popular press.
It is in these latter uses of the 3D models that I started to use LightWave in the late 1990s, beginning with version 6. There were other options at that time, ranging from free open-source packages such as POV Ray to high-end (and quite pricy) packages like Softimage 3D. However, I chose LightWave because of the great feature set, super high-quality renderer, attractive academic pricing, and a wonderful support network of other users (Flay.com comes to mind), and of course the hundreds (maybe thousands?) of great plugins to extend functionality. I also have a software background, so the ability to develop my own plugins and scripts was a fantastic bonus, and I truly appreciated the thoughtful engineering of access to the internal pipeline to facilitate extensibility.
In recent years, I have worked with artists to do life reconstructions of the animals for museum murals and 3d animation sequences. This usually entails building a virtual maquette of the animal, showing proportions, joint placements and possible kinematic range of any moving bits; essentially the 3D skeleton and soft tissues surfaces usually exported as FBX or OBJ, which the artist then uses as the basis for modelling versions in their software of choice. I have also used LightWave to do the skull reconstructions of a number of animals for a recent Smithsonian National Museum of Natural History exhibit featuring the work of Projecto PaleoAngola, of which I am a cofounder.
I used LightWave for the modelling and virtual assembly of the bones, and then combined the resultant 3D prints and cast fossil materials to build the final skull mounts. You can see a virtual version of the exhibit “Sea Monsters Unearthed; Life in Angola’s Ancient Seas” at the following link https://naturalhistory2.si.edu/vt3/misc/z_tour-m001.html .
At the end of the day, the flexibility and rich feature set of LightWave makes it an invaluable tool for my work whether producing educational materials, museum exhibits, or my academic research.
More artist work using Lightwave 3D
Great articles and interesting work created using Lightwave 3D